Helpline: 0191 491 5537

Stove Pipe

 Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and externally with a ground coat and top coat of high temperature resistant acid resistant vitreous enamel coating.  Due to the chemical specification of the steel used for this product it provides an excellent surface for the glass coating to adhere to offering a superior finish to other manufacturers.
Stove pipe is designed as a connecting flue pipe with high temperature and acid resistant vitreous enamel coating, it is suitable for use on gas, oil and multi fuel appliances up to 50kW output, with a maximum operating flue gas temperature of up to 450°C.
Stove pipes should only be used to connect from the appliance into an existing lined chimney, or  alternatively a class 1 twin wall insulated stainless steel chimney. Under NO circumstances is stove pipe to be used through a combustible floor, externally or to line an existing chimney stack.

  • Liner Thickness:- 1.2mm
  • CE Approval:- EN1856-2 T600 N1 D VM L80120 G450
  • Continuous Firing Temp:- 450°C
  • Manufactured to:- BS 6999:1989 BSRIA Report No. 17721/3
  • Enamel Heat Tested to:- BS1344 Part 1:1994 / Part 7:1984
  • Acid Resistance Tested to:- BS EN 14483-1:2004

 


There are no products matching the selection.