Flue Pipe

Flue Pipe

Flue pipe, also commonly referred to as a chimney pipe or vitreous enamel pipe, is a type of prefabricated single-wall stove pipe. It is crafted with meticulous attention to detail, ensuring it is up to the highest industry standards. The pipe is fashioned from 1.2mm thick low-carbon steel, a material chosen specifically for its robustness and durability. And allows you to install various lengths into the system.

Each component of vitreous enamel pipe is coated both on the inside and outside with a ground coat, followed by a high-temperature acid-resistant coating top coat. This dual-coating process not only safeguards the pipe from the rigours of use but also enhances its overall look and finish. The chemical makeup of the steel used for the stovepipe creates an ideal surface for the glass coating to stick to, resulting in a finish that outperforms other manufacturers in terms of quality.

  • Increaser

    Pennine One Increaser

    £43.74 Inc. VAT
    £36.45 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One Increaser is designed to increase / step up to the next diameter flue system, this item can be used directly on the top of the stove spigot or into a cut piece of stove pipe...
    £43.74 Inc. VAT
    £36.45 Ex. VAT
  • Continental Stove Adaptor

    Pennine One Continental Stove Adaptor

    £49.74 Inc. VAT
    £41.45 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One Continental Stove Adaptor is designed to fit into the top or rear of certain imported stoves which have been imported from Europe and have an odd size flue connection on them...
    £49.74 Inc. VAT
    £41.45 Ex. VAT
  • 1 Piece Stove Offset (100mm)

    1 Piece Offset (100mm)

    £92.71 Inc. VAT
    £77.26 Ex. VAT
    This 1 Piece Offset (100mm) is a single wall prefabricated pipe designed to give an aesthetically pleasing offset rather than individual parts. This is will offset the stove pipe by 100mm (4") centre to centre. Its manufactured and coated to...
    £92.71 Inc. VAT
    £77.26 Ex. VAT
  • 600mm Standard Pipe No Door

    600mm Standard Pipe No Door

    £59.95 Inc. VAT
    £49.96 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £59.95 Inc. VAT
    £49.96 Ex. VAT
  • 135° Swept Elbow No Door

    135° Swept Elbow No Door

    £77.50 Inc. VAT
    £64.58 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £77.50 Inc. VAT
    £64.58 Ex. VAT
  • Wall Band

    Pennine Wall Band (280mm Long)

    £53.56 Inc. VAT
    £44.63 Ex. VAT
    The Pennine Systems flue pipe wall band is used along a wall to provide clearance and stability of the stove pipe.  Wall bands are used to provide lateral support for your chimney flue system, the installer must cut the wall band down to suit...
    £53.56 Inc. VAT
    £44.63 Ex. VAT
  • Spun Increasing Stove Pipe Adaptor

    Spun Increasing Adaptor

    £45.35 Inc. VAT
    £37.79 Ex. VAT
    Our Spun Increasing Adaptors are manufactured in accordance with ISO9001-2008 using 1.2mm low carbon steel. Suitable for oil, gas and Solid Fuels, for domestic heating appliances. Finished products have an internal and external vitreous enamel...
    £45.35 Inc. VAT
    £37.79 Ex. VAT
  • Adjustable Pipe No Door 350mm-550mm

    Adjustable Pipe No Door 350mm-550mm

    £73.57 Inc. VAT
    £61.31 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £73.57 Inc. VAT
    £61.31 Ex. VAT
  • Continental Stove Adaptor

    Continental Stove Adaptor

    £51.58 Inc. VAT
    £42.98 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £51.58 Inc. VAT
    £42.98 Ex. VAT
  • 30 Bend No Door

    Pennine One 30° Bend No Door

    £45.61 Inc. VAT
    £38.01 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 30° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 30° Bend No Door Specs Friction Fit...
    £45.61 Inc. VAT
    £38.01 Ex. VAT
  • Premier One 1000mm Pipe No Door

    Pennine One 1000mm Pipe No Door

    £44.16 Inc. VAT
    £36.80 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 1000mm Standard Pipe No Door is designed for use directly off a stove / appliance. Pennine One 1000mm Standard Pipe No Door Specs Friction Fit (No Fire Clay...
    £44.16 Inc. VAT
    £36.80 Ex. VAT
  • 1 Piece flue pipe Offset (50mm)

    1 Piece Offset (50mm)

    £92.71 Inc. VAT
    £77.26 Ex. VAT
    The 1 Piece Stove Offset (50mm) is designed to give an aesthetically pleasing offset rather than individual parts. This is will offset the pipe by 50mm (2") centre to centre. The offset should only be used to connect from the appliance into an...
    £92.71 Inc. VAT
    £77.26 Ex. VAT
  • Standard Trim Ring

    Standard Trim Ring

    £27.89 Inc. VAT
    £23.24 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £27.89 Inc. VAT
    £23.24 Ex. VAT
  • Cut Length Adaptor

    Cut Length Adaptor

    £47.34 Inc. VAT
    £39.45 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £47.34 Inc. VAT
    £39.45 Ex. VAT
  • Standard flue pipe Tee with Branch Spigot

    Standard Tee with Branch Spigot

    £106.91 Inc. VAT
    £89.09 Ex. VAT
    This Standard Tee with Branch Spigot is a single wall prefabricated pipe designed to connect horizontally off the rear of a stove to turn the flue through 90°, manufactured and coated to the highest standards, made from 1.2mm thick low carbon...
    £106.91 Inc. VAT
    £89.09 Ex. VAT
  • 1200mm Standard Stove Pipe No Door

    1200mm Standard Pipe No Door

    £103.97 Inc. VAT
    £86.64 Ex. VAT
    This 1200mm standard pipe with no door is manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and externally with a ground coat and top coat of high temperature...
    £103.97 Inc. VAT
    £86.64 Ex. VAT
  • 45 Bend No Door

    Pennine One 45° Bend No Door

    £45.61 Inc. VAT
    £38.01 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 45° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 45° Bend No Door Specs Friction Fit...
    £45.61 Inc. VAT
    £38.01 Ex. VAT
  • Premier One 500mm Pipe No Door

    Pennine One 500mm Pipe No Door

    £28.72 Inc. VAT
    £23.93 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 500mm Standard Pipe No Door is designed for use directly off a stove / appliance. Pennine One 500mm Standard Pipe No Door Specs Friction Fit (No Fire Clay...
    £28.72 Inc. VAT
    £23.93 Ex. VAT
  • Standard Tee with Branch Socket

    Standard Tee with Branch Socket

    £106.91 Inc. VAT
    £89.09 Ex. VAT
    The Standard Tee with Branch Socket is designed with a female socket on the branch to house a draught stabiliser section. Can also be used to connect directly onto the rear of a stove with a larger than usual spigot to prevent excess fire rope being used...
    £106.91 Inc. VAT
    £89.09 Ex. VAT
  • 900mm Standard Pipe No Door

    900mm Standard Pipe No Door

    £80.59 Inc. VAT
    £67.16 Ex. VAT
    This 900mm standard pipe with no door is a single wall prefabricated pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and externally with a ground coat and top...
    £80.59 Inc. VAT
    £67.16 Ex. VAT
  • Split Trim Ring

    Split Trim Ring

    £52.51 Inc. VAT
    £43.76 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £52.51 Inc. VAT
    £43.76 Ex. VAT
  • 45 Bend With Door

    Pennine One 45° Bend With Door

    £71.78 Inc. VAT
    £59.82 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 45° WITH Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction, this bend offers the option to sweep and inspect...
    £71.78 Inc. VAT
    £59.82 Ex. VAT
  • Various Coloured Pipes

    900mm Coloured Pipe No Door

    £63.20 Inc. VAT
    £52.67 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £63.20 Inc. VAT
    £52.67 Ex. VAT
  • Premier One 250mm Pipe No Door

    Pennine One 250mm Pipe No Door

    £22.09 Inc. VAT
    £18.41 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 250mm standard stove pipe is designed for use directly off a stove / appliance. Pennine One 250mm Standard Pipe No Door Specs Friction Fit (No Fire Clay required) Manufactured in...
    £22.09 Inc. VAT
    £18.41 Ex. VAT
  • Angled Trim Ring 45°

    Angled Trim Ring 45°

    £60.54 Inc. VAT
    £50.45 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £60.54 Inc. VAT
    £50.45 Ex. VAT
  • 90° Bend

    Pennine One 90° Bend No Door

    £45.64 Inc. VAT
    £38.03 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 90° NO Door stove bend is designed for use off the rear of a stove where the flue needs to turn through 90° and rise vertically up into the chimney stack. Pennine...
    £45.64 Inc. VAT
    £38.03 Ex. VAT
  • 1000mm Pipe With Door

    Pennine One 1000mm Pipe With Door

    £70.33 Inc. VAT
    £58.61 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 1000mm Standard Pipe With Door is designed for use directly off a stove / appliance, this part offers an option to inspect or sweep the flue through the door. Pennine One 1000mm...
    £70.33 Inc. VAT
    £58.61 Ex. VAT
  • Increasing Flue Liner

    Increasing Flue Liner Adaptor

    £55.42 Inc. VAT
    £46.18 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £55.42 Inc. VAT
    £46.18 Ex. VAT
  • 90° Swept Elbow No Door

    90° Swept Elbow No Door

    £95.27 Inc. VAT
    £79.39 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £95.27 Inc. VAT
    £79.39 Ex. VAT
  • 300mm Standard Pipe No Door

    300mm Standard Pipe No Door

    £40.98 Inc. VAT
    £34.15 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £40.98 Inc. VAT
    £34.15 Ex. VAT
  • Flue Liner Adaptor

    Flue Liner Adaptor

    £47.39 Inc. VAT
    £39.49 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £47.39 Inc. VAT
    £39.49 Ex. VAT
  • Pennine Systems Tee Cap

    Pennine Systems Tee Cap

    £42.50 Inc. VAT
    £35.42 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £42.50 Inc. VAT
    £35.42 Ex. VAT
  • Wall Band

    Pennine One Wall Band (250mm Long)

    £24.68 Inc. VAT
    £20.57 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One Wall Band is designed to support the flue pipe against a nearby wall, installation of the wall band is Done by cutting the wall band support arm down to size and fastening this...
    £24.68 Inc. VAT
    £20.57 Ex. VAT
  • 90° Trim Ring (1pc)

    Pennine One 90° Trim Ring (1pc)

    £26.87 Inc. VAT
    £22.39 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 90° Trim Ring (one piece) is designed to finish off the Pennine One flue pipe to hide any unsightly hole / cut within the steel register plate, alternatively this product can...
    £26.87 Inc. VAT
    £22.39 Ex. VAT
  • 90° Split Trim Ring (2pc)

    Pennine One 90° Split Trim Ring (2pc)

    £52.34 Inc. VAT
    £43.62 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 90° Split Trim Ring (two piece) is designed to finish off the Pennine One flue pipe to hide any unsightly hole / cut within the steel register plate, alternatively this...
    £52.34 Inc. VAT
    £43.62 Ex. VAT
  • 90° Bend with Door

    Pennine One 90° Bend With Door

    £63.65 Inc. VAT
    £53.04 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 90° WITH Door stove bend is designed to connect off the rear of a stove where the flue needs to turn through 90° and rise vertically into the exsiting chimney stack...
    £63.65 Inc. VAT
    £53.04 Ex. VAT
  • Pennine One 500mm Pipe With Door

    Pennine One 500mm Pipe With Door

    £54.82 Inc. VAT
    £45.68 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 500mm Standard Pipe WithDoor is designed for use directly off a stove / appliance and offers the facility to clean and inspect within the chimney.. Pennine One 500mm Standard...
    £54.82 Inc. VAT
    £45.68 Ex. VAT
  • 150mm Standard Pipe No Door

    150mm Standard Pipe No Door

    £46.38 Inc. VAT
    £38.65 Ex. VAT
    Stove pipe is designed as a connecting flue pipe with high temperature and acid resistant vitreous enamel coating, it is suitable for use on gas, oil and multi fuel appliances up to 50kW output, with a maximum operating flue gas temperature of up to...
    £46.38 Inc. VAT
    £38.65 Ex. VAT
  • Double Socket Adaptor

    Double Socket Adaptor

    £46.82 Inc. VAT
    £39.02 Ex. VAT
    Premier Vitreous enamel commonly know as “Stove Pipe” is a single wall prefabricated stove pipe, manufactured and coated to the highest standards, made from 1.2mm thick low carbon steel.  All components are coated both internally and...
    £46.82 Inc. VAT
    £39.02 Ex. VAT
  • 0-90 Adjustable Bend Prima Smooth

    Prima Smooth 0°-90° Adj, Bend

    £101.70 Inc. VAT
    £84.75 Ex. VAT
    ***This item will ONLY fit to Pennine One products*** The Pennine One 45° NO Door stove bend is designed for use off a stove where the flue needs to offset across to miss an obstruction. Pennine One 45° Bend No Door Specs Friction Fit (No...
    £101.70 Inc. VAT
    £84.75 Ex. VAT

Flue pipes are primarily designed to serve as a connecting pipe between the stove and the chimney. It is treated with a high-temperature and acid-resistant coating that allows it to withstand the heat and byproducts generated by the stove. The vitreous enamel stove flue pipes are versatile enough to be used with various types of stoves, including those that burn wood, gas, oil, and multi-fuel appliances that have an output of up to 50kW. It can handle a maximum operating flue gas temperature of up to 450°C.

However, it's important to note that vitreous enamel pipe should only be used to connect the appliance to an existing lined chimney or a class 1 twin-wall insulated stainless steel chimney. Under no circumstances should a flue pipe be used through a combustible floor, externally, or to line an existing chimney stack, as this could pose serious safety risks. So, what makes top-quality wood stove flue pipes a worthwhile investment?

The vitreous enamel stove flue pipe is a crucial part of any wood-burning or solid-fuel stove or fireplace installation. It serves as the pathway through which exhaust gases, smoke and other by-products of stove combustion are expelled into the outside atmosphere. Quality stove flue pipe correctly allows your appliance to burn efficiently and reduce indoor air pollution. In addition, a stove pipe facilitates proper ventilation for the fire as it heats your home.

At Nationwide Chimney Components, we are proud to stock only the finest quality vitreous enamel flue pipes. When you choose to purchase from us, you can rest assured that you are investing in a durable, long-lasting stovepipe that will keep your multi-fuel cast iron fire burning in a safe and healthy manner.