Twin Wall Flue

Twin Wall Flue

Twin wall flues are specialised insulated chimney systems designed for use with open or closed solid fuel stoves. They can withstand continuous operating temperatures of up to 450°C and are perfect for heating appliances such as wood-burning stoves, gas coal effect fires, and oil boilers. These flues are ideal for new build projects and renovations as they are a simple, cost-effective solution for those without a brick chimney stack. Take a look at our article on fitting a twin wall system.

Nationwide Chimney Components only supplies premium, high-quality twin wall flue systems and twin wall flue pipes. Our twin-walled flue products include pipes with adjustable lengths, making them suitable for indoor and outdoor flues and biomass boiler installations. These products have a simple twist-lock bayonet jointing system and are available in high-grade stainless steel finish or black twin wall flue pipe in all sizes. They are also HETAS-approved, ensuring that they meet building regulations.

PLEASE NOTE DIAMETERS 180mm & 200mm ARE NO LONGER AVAILABLE IN SCHIEDEL'S ICID RANGE

  • Telescopic Pipe - 2 Piece 585-880mm

    Telescopic Pipe - 2 Piece 585-880mm

    £179.47 Inc. VAT
    £149.56 Ex. VAT
    Adjustable Telescopic Pipes are used with standard components to achieve an exact length on site and avoid on-site cutting of components. This length could also be used in starter sections to remove the appliance without removing the full system, for...
    £179.47 Inc. VAT
    £149.56 Ex. VAT
  • DEKS RapidFlash

    DEKS RapidFlash

    £111.64 Inc. VAT
    £93.03 Ex. VAT
    The DEKS Rapid Flash (Sticky) is a lead free innovation. Rapid Flash replaces the need for traditional lead based flashings, incorporating the excellent Seldek rubber cone and a cleverly designed polymer-mesh that is free from toxic material...
    £111.64 Inc. VAT
    £93.03 Ex. VAT
  • Insulated Appliance Connector for twin wall flue

    Insulated Appliance Connector (Closed)

    £62.51 Inc. VAT
    £52.09 Ex. VAT
    The ICID Insulated Appliance Connector is used to push into the appliance spigot with the male collar pointing upwards. It is used on solid fuel appliances and is sealed to the appliance with fire rope and fire cement or high temperature sealant to...
    £62.51 Inc. VAT
    £52.09 Ex. VAT
  • Schiedel ICID SW-DW Adjustable Starter Section

    Schiedel ICID SW-DW Adjustable Starter Section (Long)

    £253.98 Inc. VAT
    £211.65 Ex. VAT
    The Schiedel ICID SW-DW Adjustable Starter Section is to be used with a Schiedel Prima Smooth section to allow movement directly off the top of the stove to accept expansion and offer the facility to remove the stove by simply sliding the Prima...
    £253.98 Inc. VAT
    £211.65 Ex. VAT
  • Round Ventilated Firestop Plate

    Round Ventilated Firestop Plate - 1 Piece

    £59.75 Inc. VAT
    £49.79 Ex. VAT
    Round Ventilated Firestop Plates 1PC  ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each of the components with a male form on the liner. This creates a twin wall insulated chimney system designed for the new...
    £59.75 Inc. VAT
    £49.79 Ex. VAT
  • 45 ° Bend

    45 Degree Bend

    £122.94 Inc. VAT
    £102.45 Ex. VAT
    This 45 Degree Bend component is used to create an offset of 45° , or this can be used with other elbow components to create a bigger offset. NCC stock a wide range of high quality components so you can be sure your purchasing the very best...
    £122.94 Inc. VAT
    £102.45 Ex. VAT
  • Res Lead Flashing

    Res-Lead Master Flash

    £119.95 Inc. VAT
    £99.96 Ex. VAT
    This Res-Lead Master Flash is designed for use on concrete or profile tiled roofs where standard aluminium flashing simply can't shape around the wave or step in decorative roof tiles.  The base is manufactured from an Environmentally safe...
    £119.95 Inc. VAT
    £99.96 Ex. VAT
  • Telescopic Pipe - 2 Piece 350-570mm

    Telescopic Pipe - 2 Piece 350-570mm

    £168.02 Inc. VAT
    £140.02 Ex. VAT
    Adjustable Telescopic Pipes are used with standard components to achieve an exact length on site and avoid on-site cutting of components. This length could also be used in starter sections to remove the appliance without removing the full system, for...
    £168.02 Inc. VAT
    £140.02 Ex. VAT
  • Flat Flashing Kit

    Flat Roof Flashing Kit

    £94.61 Inc. VAT
    £78.84 Ex. VAT
    95530180 Aluminium Base and Aluminium Upstand Flashing Kit Stainless Steel Storm Collar Supplied as Part of Kit Designed for Flat Felt Roofs or Sarnafil Roofs Suitable for Flat Roofs Only
    £94.61 Inc. VAT
    £78.84 Ex. VAT
  • Residential Master Flash EPDM

    Residential Master Flash (Aluminium Base)

    £32.21 Inc. VAT
    £26.84 Ex. VAT
    The Residential Master Flash is an aluminium flashing with a rubber up stand that can be used on flat tiled or slated roofs.  The Residential Master Flash incorporates an angled up stand which is designed for roof pitches between...
    £32.21 Inc. VAT
    £26.84 Ex. VAT
  • Raincap Without Mesh

    Raincap Without Mesh

    £76.40 Inc. VAT
    £63.67 Ex. VAT
    This item is used to terminate the system and also prevents ingressive rain entering it. It has a number of features: Twist-lock bayonet jointing system. Low external case temperature. ICID corrosion tested with designation V2/V3.
    £76.40 Inc. VAT
    £63.67 Ex. VAT
  • 135° Tee including Drain Cap

    135° Tee including Drain Cap

    £349.96 Inc. VAT
    £291.63 Ex. VAT
    This 135° Tee including Drain Cap is used in combination with a 45 degree elbow to connect from the connecting flue pipe to the vertical chimney. It provides the least resistance to the flow of the flue gases. NCC stock a huge range of parts and...
    £349.96 Inc. VAT
    £291.63 Ex. VAT
  • Wall Band (60mm) for twin wall flue

    Wall Band (60mm)

    £26.30 Inc. VAT
    £21.92 Ex. VAT
    This Wall Band (60mm) is used to fix the chimney to a supporting wall and provides lateral support only at a fixed distance of 60mm off a wall.
    £26.30 Inc. VAT
    £21.92 Ex. VAT
  • 1460mm Effective Length twin wall flue

    1460mm Effective Length

    £213.24 Inc. VAT
    £177.70 Ex. VAT
    1460mm Effective Lengths are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room...
    £213.24 Inc. VAT
    £177.70 Ex. VAT
  • 1 Piece Trim Collar 45°

    1 Piece Trim Collar 45 Degree

    £52.67 Inc. VAT
    £43.89 Ex. VAT
    1 Piece Trim Collar 45 Degree are fitted around the Eco ICID pipe where it protrudes through both the inside and the outside of the wall at 45 degrees. They provide a more aesthetic finish when installed on site. 1 Piece Trim Collar Features ...
    £52.67 Inc. VAT
    £43.89 Ex. VAT
  • 15 degree bend twin wall flue pipe

    15 Degree Bend

    £122.94 Inc. VAT
    £102.45 Ex. VAT
    This 15 degree bend component is used to create an offset, this can be used with other elbow components to create a bigger offset. Building an effective twin wall system relies on the quality of the components, NCC stock a huge range of pipes and offsets...
    £122.94 Inc. VAT
    £102.45 Ex. VAT
  • Raincap with 25mm Anti-bird Mesh

    Raincap with 25mm Anti-bird Mesh

    £90.26 Inc. VAT
    £75.22 Ex. VAT
    This Raincap with 25mm Anti-bird Mesh  is used to terminate the system and also prevents ingressive rain entering it. This item is supplied with 25mm square mesh to prevent birds from nesting. Raincap features Twist-lock bayonet jointing...
    £90.26 Inc. VAT
    £75.22 Ex. VAT
  • Round Ventilated Firestop Plate

    Round Ventilated Firestop Plate - 2 Piece

    £64.32 Inc. VAT
    £53.60 Ex. VAT
    9424B0200/127228 Round Ventilated Firestop Plates 2PC – ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each component with a male form on the liner. This creates a twin wall insulated chimney system designed for the...
    £64.32 Inc. VAT
    £53.60 Ex. VAT
  • 960mm Effective Length for twin wall flue

    960mm Effective Length

    £143.77 Inc. VAT
    £119.81 Ex. VAT
    960mm Effective Length are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room areas...
    £143.77 Inc. VAT
    £119.81 Ex. VAT
  • 90° Tee including Drain Cap

    90° Tee including Drain Cap

    £294.48 Inc. VAT
    £245.40 Ex. VAT
    90° Tee including Drain Cap for dry applications only. This item is used to connect from the connecting flue pipe to the vertical system chimney at 90 Degrees. Or the branch may be used to connect to a draught stabiliser. NCC pride themselves in the...
    £294.48 Inc. VAT
    £245.40 Ex. VAT
  • Insulated Appliance Connector

    Insulated Appliance Connector

    £92.68 Inc. VAT
    £77.23 Ex. VAT
    The ICID Insulated Appliance Connector is used to push into the appliance spigot with the male collar pointing upwards. It is used on solid fuel appliances and is sealed to the appliance with fire rope and fire cement or high temperature sealant to...
    £92.68 Inc. VAT
    £77.23 Ex. VAT
  • 1 Piece Trim Collar 90°

    1 Piece Trim Collar 90 Degree

    £43.18 Inc. VAT
    £35.98 Ex. VAT
    The 1 Piece Trim Collar 90 Degree are used to give an aesthetic finish where the chimney penetrates the wall of a building. The 90 version is used on horizontal penetrations with a 45 version being used in combination with a 45 tee connection. 1...
    £43.18 Inc. VAT
    £35.98 Ex. VAT
  • Bungalow Firestop Plate - 2 Piece

    Bungalow Firestop Plate - 2 Piece

    £35.26 Inc. VAT
    £29.38 Ex. VAT
    £35.26 Inc. VAT
    £29.38 Ex. VAT
  • 30° Bend

    30 Degree Bend

    £122.94 Inc. VAT
    £102.45 Ex. VAT
    This component is used to create an offset of 30 degree, or this can be used with other elbow components to create a bigger offset. Twinwall insulated elbows and bends can be used either internally or externally as part of your new flue system, it...
    £122.94 Inc. VAT
    £102.45 Ex. VAT
  • Eurocowl Mesh

    Mini Euro Cowl Mesh

    £28.01 Inc. VAT
    £23.34 Ex. VAT
    Mini Euro Cowl Stainless Steel Features Designed to Fit into an existing Mini Eurocowl Suitable for Gas and Multifuel Applications Helps Prevent Birds from Nesting
    £28.01 Inc. VAT
    £23.34 Ex. VAT
  • External Fix Wall Band 60mm-90mm

    External Fix Wall Band 60mm-90mm

    £115.72 Inc. VAT
    £96.43 Ex. VAT
    The External Fix Wall Band 60mm-90mm is used to fix the flue pipe to a supporting wall in twin wall flue set ups and provides lateral support at an adjustable distance of 60mm-90mm. The unique design allows the installer to fix the bracket to...
    £115.72 Inc. VAT
    £96.43 Ex. VAT
  • Bungalow Square Firestop Plate

    Bungalow Square Firestop Plate - 1 Piece

    £45.66 Inc. VAT
    £38.05 Ex. VAT
    This Bungalow Square Firestop Plate, the unventilated firestop plate is a 1 piece kit which is designed to prevent fires.
    £45.66 Inc. VAT
    £38.05 Ex. VAT
  • Magentic Firestop Cover Plate Kit

    Magentic Firestop Cover Plate Kit

    £48.08 Inc. VAT
    £40.07 Ex. VAT
    This Magentic Firestop Cover Plate Kit is a new addition to the ventilated firestop range has been introduced an aesthetic cover plate kit, which fastens to the standard ventilated firestops using the magnets which are provided in the kit along with...
    £48.08 Inc. VAT
    £40.07 Ex. VAT
  • Schiedel ICID Insulated Increasing Adaptor

    Schiedel ICID Insulated Increasing Adaptor

    £91.69 Inc. VAT
    £76.41 Ex. VAT
    The Schiedel ICID Insulated Increasing Adaptor is used to start the connection from the appliance to the flue and allows increasing of the flue. It will sink into the appliance spigot and connect to a pipe length. ICID Insulated Increasing Adaptor...
    £91.69 Inc. VAT
    £76.41 Ex. VAT
  • Mini Euro Cowl Stainless Steel

    Mini Euro Cowl Stainless Steel for Twin Wall

    £176.15 Inc. VAT
    £146.79 Ex. VAT
    Mini Euro Cowl Stainless Steel Features Designed to Adapt to a Twinwall Flue (5" or 6" Int) Static Anti Downdraught Cowl Sold Fully Assembled and Ready to Fit No Special Tools Required Made from 316 Grade Stainless Steel Complete with Stainless...
    £176.15 Inc. VAT
    £146.79 Ex. VAT
  • Anti-splash Anti-downdraught Terminal

    Anti-downdraught Terminal

    £114.46 Inc. VAT
    £95.38 Ex. VAT
    This item is used to terminate an installation and provides protection to avoid rainwater from entering the chimney system, whilst minimising problems associated with downdraught. Care should be taken to ensure that the chimney is cleaned regularly...
    £114.46 Inc. VAT
    £95.38 Ex. VAT
  • 750mm Effective Length

    750mm Effective Length

    £118.10 Inc. VAT
    £98.42 Ex. VAT
    Effective Chimney Pipe Lengths are used to make up spaces in order for the system to operate. The chimney flue pipe lengths can be applied either vertically or horizontally. The shorter chimney pipe lengths are great for making up spaces in tight room...
    £118.10 Inc. VAT
    £98.42 Ex. VAT
  • Tee Plug with Drain

    Tee Plug with Drain

    £48.60 Inc. VAT
    £40.50 Ex. VAT
    This item is used at the base of the vertical chimney to provide a drain off point for rainwater and condensate. It also provides inspection or cleaning access. It may be used in both dry and wet conditions and on both positive and negative pressure...
    £48.60 Inc. VAT
    £40.50 Ex. VAT
  • SW-DW Starter Section (Long) Black

    SW-DW Starter Section (Long)

    £177.08 Inc. VAT
    £147.57 Ex. VAT
    SW-DW Starter Section (long) is to be used to connect from a standard stove pipe or Prima Smooth connecting pipe. This item must NOT be connected directly to the stove spigot/outlet. 316L Grade Stainless Steel Liner Corrosion tested...
    £177.08 Inc. VAT
    £147.57 Ex. VAT
  • External Fix Wall Band with Extensions 95mm-450mm

    External Fix Wall Band with Extension 95mm-450mm

    £121.12 Inc. VAT
    £100.93 Ex. VAT
    The External Fix Wall Band  with Extension 95mm-450mm is used to fix the flue pipe to a supporting wall in twin wall flue set ups and provides lateral support at an adjustable distance of 95mm-450mm. The unique design allows the installer...
    £121.12 Inc. VAT
    £100.93 Ex. VAT
  • SW-DW Adjustable Starter Section

    SW-DW Adjustable Starter Section (Short)

    £142.76 Inc. VAT
    £118.97 Ex. VAT
    SW-DW Adjustable Starter Section (Short) is to be used with a Schiedel Prima Smooth section to allow movement directly off the top of the stove to accept expansion and offer the facility to remove the stove by simply sliding the Prima Smooth Pipe up...
    £142.76 Inc. VAT
    £118.97 Ex. VAT
  • Rectangular Ventilated Firestop Plate

    Rectangular Ventilated Firestop Plate - 2 Piece

    £56.26 Inc. VAT
    £46.88 Ex. VAT
    Rectangular Ventilated Firestop Plate – ICS Firestop components. ICS is converted into ICS Plus by adding a lip seal to each component with a male form on the liner. This creates a twin wall insulated chimney system designed for the new...
    £56.26 Inc. VAT
    £46.88 Ex. VAT
  • 90° Bend

    90 Degree Bend

    £143.77 Inc. VAT
    £119.81 Ex. VAT
    This 90 Degree Bend is used in pairs to provide an offset of 30° 90 Degree Bend Features Twist-lock bayonet jointing system. Fast inter fit with ICID System Chimney. Low external case temperature. Suitable for use on solid fuel appliances. ICID...
    £143.77 Inc. VAT
    £119.81 Ex. VAT

The external diameter of double-walled flues is 60 mm more than the inside diameter. So, a 150 mm pipe has an outer diameter of 210 mm. Our twin wall flues can pass through floors, roofs, or walls, depending on your required flue route. We stock the Schiedel flue system and are one of the UK's leading providers of flue supplies and flue liners.

When installing a twin wall insulated flue system, it is essential to contact a HETAS approved tradesperson to ensure that your flue system is fitted correctly and meets building regulations. At Nationwide Chimney Components, we are committed to providing our customers with the highest quality twin wall flue products and services to ensure a safe and efficient heating system.